Round Zipper Bag for Tree Straps

CLICK HERE to download the pattern.  Print in landscape mode, and verify that the 1" square is truly 1".

YOU WILL NEED

· 5 PIECES CUT FROM FABRIC

· PATTERN A: CUT 2 CIRCLES

· PATTERN B: CUT 2 SIDE OF ZIPPER

· PATTERN C: CUT 1 SIDE OF BAG

· 9” ZIPPER (WITH ZIPPER PULL)

· 4 to 6” GROSGRAIN RIBBON

· 2 D-RINGS (OPTIONAL)

INSTRUCTIONS

All SEAM ALLOWANCES ARE 1/2”

· With right sides facing and the edges of the zipper tape and fabric lined up, sew the zipper to both pieces of Pattern B; overcast stitch the raw edge of the fabric to the zipper tape; press open flat and topstitch the fabric to the zipper tape.

· Cut grosgrain into two pieces, fold each piece in half, and baste to ends of zipper so that the loops are facing inward.  (Add D-Rings to grosgrain before basting if desired).

· With right sides together, sew zipper assembly to the narrow edges of both sides of Pattern C; overcast stitch raw edges; then tack down.

· Sew the circle to the side of the bag on each side:: 

Put the loop of the zipper assembly (pattern pieces B and C) on the bottom (against the feed dogs) with the right side facing up.  Place the circle with right-side facing down. 

Tip:  Hold the bottom / straight piece of fabric straight with your right hand. 

Tip:  Use your left hand to ease the circle so that the edges of both pieces of fabric line up.  Hold the circle at least 1/2” in from the edge to prevent bias stretching. 

Tip:  Stop sewing with your needle in the down position, lift your foot, and ease the fabric when needed to keep circle stitching smooth and to prevent puckering.

Tip:  Mark your seam allowance on the circle with a pencil if needed.

· Trim and overcast stitch the raw edge of the circle.  Turn bag right-side out.

Happy sewing!